Installing a Door in Less Than 10 Minutes

Installing a door may sound daunting, but with the right tools, it's possible. You could even complete the job in under 10 minutes. Here's how door installers do it:

1. Check Your Tools: Before beginning, ensure you have all the necessary tools and materials. This includes the door, doorframe, screws, screwdriver, and a level.

Video Source

Don't forget anything!

2. Prepare the Doorframe: Check that the doorframe is clean, level, and free from any obstructions. This step is essential for a seamless installation. You'll set yourself up for simple work.

3. Hinge Alignment: Position the door in the frame. Ensure the hinges align perfectly. Hold the door in place while you secure the hinges with screws.

4. Check for Level: Use a level to verify that the door is plumb and level. Adjust as necessary by shimming the doorframe until it's perfectly aligned. Check twice or even three times if you have to!

5. Secure the Door: Once the door is plumb, secure it by driving screws through the frame into the wall studs. Open and close the door several times. This is to ensure it operates smoothly and doesn't stick or bind.

6. Install the Hardware: Finally, attach the doorknob, latch, and strike plate according to the manufacturer's instructions. Test the doorknob to ensure it latches securely. Make necessary adjustments to ensure the door closes snugly without gaps.

This guide simplifies the process done by door installers. However, remember that the time required may vary based on your experience and the complexity of the door installation. Don't be discouraged if you're taking more time than expected!